changed stuff to allow for debian and arch auto installs

README.md

@@ -1,29 +1,33 @@
 # To auto-install run the commands below as root
 
-## For laptop
+## For deb on ...
+
+### laptop
 
 ```
 apt-get update && apt-get install -y curl git
-curl https://gitea.voxelvortex.tk/voxelvortex/InstaTout/raw/branch/master/laptop_install.sh | sh
+curl https://gitea.voxelvortex.tk/voxelvortex/InstaTout/raw/branch/deb/laptop_install.sh | sh
 ```
 
-or if you want to set a custom git download folder
+### desktop
 
 ```
 apt-get update && apt-get install -y curl git
-curl https://gitea.voxelvortex.tk/voxelvortex/InstaTout/raw/branch/master/laptop_install.sh "./path/to/stuff" | sh
+curl https://gitea.voxelvortex.tk/voxelvortex/InstaTout/raw/branch/deb/desktop_install.sh | sh
 ```
 
-## For desktop
+## For arch on ...
+
+### laptop
 
 ```
-apt-get update && apt-get install -y curl git
+pacman -Syu curl git
-curl https://gitea.voxelvortex.tk/voxelvortex/InstaTout/raw/branch/master/desktop_install.sh | sh
+https://gitea.voxelvortex.tk/voxelvortex/InstaTout/raw/branch/arch/laptop_install.sh
 ```
 
-or if you want to set a custom git download folder
+### desktop
 
 ```
-apt-get update && apt-get install -y curl git
+pacman -Syu curl git
-curl https://gitea.voxelvortex.tk/voxelvortex/InstaTout/raw/branch/master/desktop_install.sh "./path/to/stuff" | sh
+https://gitea.voxelvortex.tk/voxelvortex/InstaTout/raw/branch/arch/desktop_install.sh
 ```

auto_move.sh

@@ -1,39 +0,0 @@
-# Set vars
-LOC=$1
-LOCAL_USER=$2
-
-# unarchive your files
-7z x $LOC -o./files/temp/
-
-# try staging laptop stuff, if that fails do desktop stuff
-mv ./files/temp/Laptop ./files/temp/$LOCAL_USER/ ||\
-mv ./files/temp/Desktop ./files/temp/$LOCAL_USER/
-
-# copy the files to where theyre supposed to go on the system
-cp -vR ./files/temp/$LOCAL_USER/* /home/$LOCAL_USER/
-
-# change ownership of the user's stuff so you dont have privilege issues
-chown -R $LOCAL_USER /home/$LOCAL_USER
-chgrp -R $LOCAL_USER /home/$LOCAL_USER
-
-# make neofetch config folders
-mkdir ~/.config
-mkdir ~/.config/neofetch
-
-# delete any default configs in root so that they can be set properly
-rm ~/.zshrc
-rm ~/.config/neofetch/config.conf
-rm ~/.gitconfig
-
-# link some stuff do the unpriv users' stuff
-# NOTE: The way I was linking zshrc is potentially dangerous since it would allow for priv esc from the unpriv user to 
-#       root privilege. Don't do this. It is dumb lol.
-# ln -s /home/$LOCAL_USER/.zshrc ~/.zshrc
-# As far as I know the config files dont run code, so its safe to link them so they will auto update if you change them as your normal user
-cp /home/$LOCAL_USER/.zshrc ~/.zshrc
-ln -s /home/$LOCAL_USER/.config/neofetch/config.conf ~/.config/neofetch/config.conf
-ln -s /home/$LOCAL_USER/.gitconfig ~/.gitconfig
-
-# add my bashrc additions to root and the local user
-echo `cat ./files/.bashrc` >> /home/$LOCAL_USER/.bashrc
-echo `cat ./files/.bashrc` >> ~/.bashrc

desktop_install.sh

@@ -1,21 +0,0 @@
-LOC=$1
-
-if [ -z "$1" ]
-  then
-    LOC="./.auto-install"
-fi
-
-git clone https://gitea.voxelvortex.tk:443/voxelvortex/InstaTout.git $LOC
-git fetch
-git branch arch
-
-# Install all the generic programs
-$LOC/program_install.sh
-
-# Make sure all the packages I want for my desktop are installed
-pacman -Syu chromium python3 python-pip docker-compose docker zsh gdb p7zip git iputils dnsutils net-tools handbrake handbrake-cli ffmpeg htop nano vim neovim nmap netcat ssh tree vlc obs-studio audacity filezilla
-
-# If wired networking is working, but gnome doesnt recognize it properly, check out this post:
-# https://forums.debian.net/viewtopic.php?t=104561
-
-sh $LOC/finalize.sh

files/.bashrc

@@ -1,4 +0,0 @@
-# additions from InstaTout
-
-export PS1="[\[$(tput sgr0)\]\[\033[38;5;160m\]\u\[$(tput sgr0)\]] \[$(tput sgr0)\]\[\033[38;5;68m\]\W\[$(tput sgr0)\] > \[$(tput sgr0)\]"
-neofetch

files/preferences

@@ -1,7 +0,0 @@
-Package: *
-Pin: release a=bullseye
-Pin-Priority: 500
-
-Package: *
-Pin: release a=unstable
-Pin-Priority: 100

files/unstable.list

@@ -1,2 +0,0 @@
-deb https://deb.debian.org/debian/ unstable main contrib
-deb-src http://deb.debian.org/debian/ unstable main contrib

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/Kconfig

@@ -1,19 +0,0 @@
-config WLAN_VENDOR_REALTEK
-	bool "Realtek devices"
-	default y
-	---help---
-	  If you have a wireless card belonging to this class, say Y.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all the
-	  questions about these cards. If you say Y, you will be asked for
-	  your specific card in the following questions.
-
-if WLAN_VENDOR_REALTEK
-
-source "drivers/net/wireless/realtek/rtl818x/Kconfig"
-source "drivers/net/wireless/realtek/rtlwifi/Kconfig"
-source "drivers/net/wireless/realtek/rtl8xxxu/Kconfig"
-source "drivers/net/wireless/realtek/rtw88/Kconfig"
-
-endif # WLAN_VENDOR_REALTEK

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/Makefile

@@ -1,10 +0,0 @@
-#
-# Makefile for the Linux Wireless network device drivers for Realtek units
-#
-
-obj-$(CONFIG_RTL8180)		+= rtl818x/
-obj-$(CONFIG_RTL8187)		+= rtl818x/
-obj-$(CONFIG_RTLWIFI)		+= rtlwifi/
-obj-$(CONFIG_RTL8XXXU)		+= rtl8xxxu/
-obj-$(CONFIG_RTW88)		+= rtw88/
-

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtl818x/Kconfig

@@ -1,88 +0,0 @@
-#
-# RTL818X Wireless LAN device configuration
-#
-config RTL8180
-	tristate "Realtek 8180/8185/8187SE PCI support"
-	depends on MAC80211 && PCI
-	select EEPROM_93CX6
-	---help---
-	  This is a driver for RTL8180, RTL8185 and RTL8187SE based cards.
-	  These are PCI based chips found in cards such as:
-
-	  (RTL8185 802.11g)
-	  A-Link WL54PC
-
-	  (RTL8180 802.11b)
-	  Belkin F5D6020 v3
-	  Belkin F5D6020 v3
-	  Dlink DWL-610
-	  Dlink DWL-510
-	  Netgear MA521
-	  Level-One WPC-0101
-	  Acer Aspire 1357 LMi
-	  VCTnet PC-11B1
-	  Ovislink AirLive WL-1120PCM
-	  Mentor WL-PCI
-	  Linksys WPC11 v4
-	  TrendNET TEW-288PI
-	  D-Link DWL-520 Rev D
-	  Repotec RP-WP7126
-	  TP-Link TL-WN250/251
-	  Zonet ZEW1000
-	  Longshine LCS-8031-R
-	  HomeLine HLW-PCC200
-	  GigaFast WF721-AEX
-	  Planet WL-3553
-	  Encore ENLWI-PCI1-NT
-	  TrendNET TEW-266PC
-	  Gigabyte GN-WLMR101
-	  Siemens-fujitsu Amilo D1840W
-	  Edimax EW-7126
-	  PheeNet WL-11PCIR
-	  Tonze PC-2100T
-	  Planet WL-8303
-	  Dlink DWL-650 v M1
-	  Edimax EW-7106
-	  Q-Tec 770WC
-	  Topcom Skyr@cer 4011b
-	  Roper FreeLan 802.11b (edition 2004)
-	  Wistron Neweb Corp CB-200B
-	  Pentagram HorNET
-	  QTec 775WC
-	  TwinMOS Booming B Series
-	  Micronet SP906BB
-	  Sweex LC700010
-	  Surecom EP-9428
-	  Safecom SWLCR-1100
-
-	  Thanks to Realtek for their support!
-
-config RTL8187
-	tristate "Realtek 8187 and 8187B USB support"
-	depends on MAC80211 && USB
-	select EEPROM_93CX6
-	---help---
-	  This is a driver for RTL8187 and RTL8187B based cards.
-	  These are USB based chips found in devices such as:
-
-	  Netgear WG111v2
-	  Level 1 WNC-0301USB
-	  Micronet SP907GK V5
-	  Encore ENUWI-G2
-	  Trendnet TEW-424UB
-	  ASUS P5B Deluxe/P5K Premium motherboards
-	  Toshiba Satellite Pro series of laptops
-	  Asus Wireless Link
-	  Linksys WUSB54GC-EU v2
-	    (v1 = rt73usb; v3 is rt2070-based,
-	     use staging/rt3070 or try rt2800usb)
-
-	  Thanks to Realtek for their support!
-
-# If possible, automatically enable LEDs for RTL8187.
-
-config RTL8187_LEDS
-	bool
-	depends on RTL8187 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = RTL8187)
-	default y
-

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtl818x/Makefile

@@ -1,2 +0,0 @@
-obj-$(CONFIG_RTL8180)	+= rtl8180/
-obj-$(CONFIG_RTL8187)	+= rtl8187/

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtl818x/rtl8180/Makefile

@@ -1,5 +0,0 @@
-rtl818x_pci-objs	:= dev.o rtl8225.o sa2400.o max2820.o grf5101.o rtl8225se.o
-
-obj-$(CONFIG_RTL8180)	+= rtl818x_pci.o
-
-ccflags-y += -Idrivers/net/wireless/realtek/rtl818x

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtl818x/rtl8187/Makefile

@@ -1,5 +0,0 @@
-rtl8187-objs		:= dev.o rtl8225.o leds.o rfkill.o
-
-obj-$(CONFIG_RTL8187)	+= rtl8187.o
-
-ccflags-y += -Idrivers/net/wireless/realtek/rtl818x

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtl8xxxu/Kconfig

@@ -1,34 +0,0 @@
-#
-# RTL8XXXU Wireless LAN device configuration
-#
-config RTL8XXXU
-	tristate "RTL8723AU/RTL8188[CR]U/RTL819[12]CU (mac80211) support"
-	depends on MAC80211 && USB
-	---help---
-	  This is an alternative driver for various Realtek RTL8XXX
-	  parts written to utilize the Linux mac80211 stack.
-	  The driver is known to work with a number of RTL8723AU,
-	  RL8188CU, RTL8188RU, RTL8191CU, and RTL8192CU devices
-
-	  This driver is under development and has a limited feature
-	  set. In particular it does not yet support 40MHz channels
-	  and power management. However it should have a smaller
-	  memory footprint than the vendor drivers and benefits
-	  from the in kernel mac80211 stack.
-
-	  It can coexist with drivers from drivers/staging/rtl8723au,
-	  drivers/staging/rtl8192u, and drivers/net/wireless/rtlwifi,
-	  but you will need to control which module you wish to load.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called r8xxxu.  If unsure, say N.
-
-config RTL8XXXU_UNTESTED
-	bool "Include support for untested Realtek 8xxx USB devices (EXPERIMENTAL)"
-	depends on RTL8XXXU
-	---help---
-	  This option enables detection of Realtek 8723/8188/8191/8192 WiFi
-	  USB devices which have not been tested directly by the driver
-	  author or reported to be working by third parties.
-
-	  Please report your results!

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtl8xxxu/Makefile

@@ -1,4 +0,0 @@
-obj-$(CONFIG_RTL8XXXU)	+= rtl8xxxu.o
-
-rtl8xxxu-y	:= rtl8xxxu_core.o rtl8xxxu_8192e.o rtl8xxxu_8723b.o \
-		   rtl8xxxu_8723a.o rtl8xxxu_8192c.o

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtlwifi/Kconfig

@@ -1,154 +0,0 @@
-menuconfig RTL_CARDS
-	tristate "Realtek rtlwifi family of devices"
-	depends on MAC80211 && (PCI || USB)
-	default y
-	---help---
-	  This option will enable support for the Realtek mac80211-based
-	  wireless drivers. Drivers rtl8192ce, rtl8192cu, rtl8192se, rtl8192de,
-	  rtl8723ae, rtl8723be, rtl8188ee, rtl8192ee, and rtl8821ae share
-	  some common code.
-
-if RTL_CARDS
-
-config RTL8192CE
-	tristate "Realtek RTL8192CE/RTL8188CE Wireless Network Adapter"
-	depends on PCI
-	select RTL8192C_COMMON
-	select RTLWIFI
-	select RTLWIFI_PCI
-	---help---
-	This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe
-	wireless network adapters.
-
-	If you choose to build it as a module, it will be called rtl8192ce
-
-config RTL8192SE
-	tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter"
-	depends on PCI
-	select RTLWIFI
-	select RTLWIFI_PCI
-	---help---
-	This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe
-	wireless network adapters.
-
-	If you choose to build it as a module, it will be called rtl8192se
-
-config RTL8192DE
-	tristate "Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter"
-	depends on PCI
-	select RTLWIFI
-	select RTLWIFI_PCI
-	---help---
-	This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe
-	wireless network adapters.
-
-	If you choose to build it as a module, it will be called rtl8192de
-
-config RTL8723AE
-	tristate "Realtek RTL8723AE PCIe Wireless Network Adapter"
-	depends on PCI
-	select RTLWIFI
-	select RTLWIFI_PCI
-	select RTL8723_COMMON
-	select RTLBTCOEXIST
-	---help---
-	This is the driver for Realtek RTL8723AE 802.11n PCIe
-	wireless network adapters.
-
-	If you choose to build it as a module, it will be called rtl8723ae
-
-config RTL8723BE
-	tristate "Realtek RTL8723BE PCIe Wireless Network Adapter"
-	depends on PCI
-	select RTLWIFI
-	select RTLWIFI_PCI
-	select RTL8723_COMMON
-	select RTLBTCOEXIST
-	---help---
-	This is the driver for Realtek RTL8723BE 802.11n PCIe
-	wireless network adapters.
-
-	If you choose to build it as a module, it will be called rtl8723be
-
-config RTL8188EE
-	tristate "Realtek RTL8188EE Wireless Network Adapter"
-	depends on PCI
-	select RTLWIFI
-	select RTLWIFI_PCI
-	---help---
-	This is the driver for Realtek RTL8188EE 802.11n PCIe
-	wireless network adapters.
-
-	If you choose to build it as a module, it will be called rtl8188ee
-
-config RTL8192EE
-	tristate "Realtek RTL8192EE Wireless Network Adapter"
-	depends on PCI
-	select RTLWIFI
-	select RTLWIFI_PCI
-	select RTLBTCOEXIST
-	---help---
-	This is the driver for Realtek RTL8192EE 802.11n PCIe
-	wireless network adapters.
-
-	If you choose to build it as a module, it will be called rtl8192ee
-
-config RTL8821AE
-	tristate "Realtek RTL8821AE/RTL8812AE Wireless Network Adapter"
-	depends on PCI
-	select RTLWIFI
-	select RTLWIFI_PCI
-	select RTLBTCOEXIST
-	---help---
-	This is the driver for Realtek RTL8821AE/RTL8812AE 802.11ac PCIe
-	wireless network adapters.
-
-	If you choose to build it as a module, it will be called rtl8821ae
-
-config RTL8192CU
-	tristate "Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter"
-	depends on USB
-	select RTLWIFI
-	select RTLWIFI_USB
-	select RTL8192C_COMMON
-	---help---
-	This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB
-	wireless network adapters.
-
-	If you choose to build it as a module, it will be called rtl8192cu
-
-config RTLWIFI
-	tristate
-	select FW_LOADER
-
-config RTLWIFI_PCI
-	tristate
-
-config RTLWIFI_USB
-	tristate
-
-config RTLWIFI_DEBUG
-	bool "Debugging output for rtlwifi driver family"
-	depends on RTLWIFI
-	default y
-	---help---
-	To use the module option that sets the dynamic-debugging level for,
-	the front-end driver, this parameter must be "Y". For memory-limited
-	systems, choose "N". If in doubt, choose "Y".
-
-config RTL8192C_COMMON
-	tristate
-	depends on RTL8192CE || RTL8192CU
-	default y
-
-config RTL8723_COMMON
-	tristate
-	depends on RTL8723AE || RTL8723BE
-	default y
-
-config RTLBTCOEXIST
-	tristate
-	depends on RTL8723AE || RTL8723BE || RTL8821AE || RTL8192EE
-	default y
-
-endif

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtlwifi/Makefile

@@ -1,33 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_RTLWIFI) 		+= rtlwifi.o
-rtlwifi-objs	:=		\
-		base.o		\
-		cam.o		\
-		core.o		\
-		debug.o		\
-		efuse.o		\
-		ps.o		\
-		rc.o		\
-		regd.o		\
-		stats.o
-
-rtl8192c_common-objs +=		\
-
-obj-$(CONFIG_RTLWIFI_PCI)	+= rtl_pci.o
-rtl_pci-objs	:=		pci.o
-
-obj-$(CONFIG_RTLWIFI_USB)	+= rtl_usb.o
-rtl_usb-objs	:=		usb.o
-
-obj-$(CONFIG_RTL8192C_COMMON)	+= rtl8192c/
-obj-$(CONFIG_RTL8192CE)		+= rtl8192ce/
-obj-$(CONFIG_RTL8192CU)		+= rtl8192cu/
-obj-$(CONFIG_RTL8192SE)		+= rtl8192se/
-obj-$(CONFIG_RTL8192DE)		+= rtl8192de/
-obj-$(CONFIG_RTL8723AE)		+= rtl8723ae/
-obj-$(CONFIG_RTL8723BE)		+= rtl8723be/
-obj-$(CONFIG_RTL8188EE)		+= rtl8188ee/
-obj-$(CONFIG_RTLBTCOEXIST)	+= btcoexist/
-obj-$(CONFIG_RTL8723_COMMON)	+= rtl8723com/
-obj-$(CONFIG_RTL8821AE)		+= rtl8821ae/
-obj-$(CONFIG_RTL8192EE)		+= rtl8192ee/

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtlwifi/btcoexist/Makefile

@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-btcoexist-objs :=	halbtc8192e2ant.o	\
-			halbtc8723b1ant.o	\
-			halbtc8723b2ant.o	\
-			halbtc8821a1ant.o	\
-			halbtc8821a2ant.o	\
-			halbtcoutsrc.o		\
-			rtl_btc.o
-
-obj-$(CONFIG_RTLBTCOEXIST) += btcoexist.o

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/Makefile

@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-rtl8188ee-objs :=		\
-		dm.o		\
-		fw.o		\
-		hw.o		\
-		led.o		\
-		phy.o		\
-		pwrseq.o	\
-		rf.o		\
-		sw.o		\
-		table.o		\
-		trx.o
-
-obj-$(CONFIG_RTL8188EE) += rtl8188ee.o

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtlwifi/rtl8192c/Makefile

@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-rtl8192c-common-objs :=		\
-		main.o		\
-		dm_common.o	\
-		fw_common.o	\
-		phy_common.o
-
-obj-$(CONFIG_RTL8192C_COMMON) += rtl8192c-common.o

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/Makefile

@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-rtl8192ce-objs :=		\
-		dm.o		\
-		hw.o		\
-		led.o		\
-		phy.o		\
-		rf.o		\
-		sw.o		\
-		table.o		\
-		trx.o
-
-obj-$(CONFIG_RTL8192CE) += rtl8192ce.o

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/Makefile

@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-rtl8192cu-objs :=		\
-		dm.o		\
-		hw.o		\
-		led.o		\
-		mac.o		\
-		phy.o		\
-		rf.o		\
-		sw.o		\
-		table.o		\
-		trx.o
-
-obj-$(CONFIG_RTL8192CU) += rtl8192cu.o

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtlwifi/rtl8192de/Makefile

@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-rtl8192de-objs :=		\
-		dm.o		\
-		fw.o		\
-		hw.o		\
-		led.o		\
-		phy.o		\
-		rf.o		\
-		sw.o		\
-		table.o		\
-		trx.o
-
-obj-$(CONFIG_RTL8192DE) += rtl8192de.o

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/Makefile

@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-rtl8192ee-objs :=		\
-		dm.o		\
-		fw.o		\
-		hw.o		\
-		led.o		\
-		phy.o		\
-		pwrseq.o	\
-		rf.o		\
-		sw.o		\
-		table.o		\
-		trx.o		\
-
-
-obj-$(CONFIG_RTL8192EE) += rtl8192ee.o

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtlwifi/rtl8192se/Makefile

@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-rtl8192se-objs :=		\
-		dm.o		\
-		fw.o		\
-		hw.o		\
-		led.o		\
-		phy.o		\
-		rf.o		\
-		sw.o		\
-		table.o		\
-		trx.o
-
-obj-$(CONFIG_RTL8192SE) += rtl8192se.o
-

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/Makefile

@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-rtl8723ae-objs :=		\
-		dm.o		\
-		fw.o		\
-		hal_btc.o	\
-		hal_bt_coexist.o\
-		hw.o		\
-		led.o		\
-		phy.o		\
-		pwrseq.o	\
-		rf.o		\
-		sw.o		\
-		table.o		\
-		trx.o		\
-
-
-obj-$(CONFIG_RTL8723AE) += rtl8723ae.o

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtlwifi/rtl8723be/Makefile

@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-rtl8723be-objs :=		\
-		dm.o		\
-		fw.o		\
-		hw.o		\
-		led.o		\
-		phy.o		\
-		pwrseq.o	\
-		rf.o		\
-		sw.o		\
-		table.o		\
-		trx.o		\
-
-
-obj-$(CONFIG_RTL8723BE) += rtl8723be.o

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtlwifi/rtl8723com/Makefile

@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-rtl8723-common-objs :=		\
-		main.o		\
-		dm_common.o	\
-		fw_common.o	\
-		phy_common.o
-
-obj-$(CONFIG_RTL8723_COMMON) += rtl8723-common.o

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/Makefile

@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-rtl8821ae-objs :=		\
-		dm.o		\
-		fw.o		\
-		hw.o		\
-		led.o		\
-		phy.o		\
-		pwrseq.o	\
-		rf.o		\
-		sw.o		\
-		table.o		\
-		trx.o		\
-
-
-obj-$(CONFIG_RTL8821AE) += rtl8821ae.o

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtw88/Kconfig

@@ -1,54 +0,0 @@
-menuconfig RTW88
-	tristate "Realtek 802.11ac wireless chips support"
-	depends on MAC80211
-	help
-	  This module adds support for mac80211-based wireless drivers that
-	  enables Realtek IEEE 802.11ac wireless chipsets.
-
-	  If you choose to build a module, it'll be called rtw88.
-
-if RTW88
-
-config RTW88_CORE
-	tristate
-
-config RTW88_PCI
-	tristate
-
-config RTW88_8822BE
-	bool "Realtek 8822BE PCI wireless network adapter"
-	depends on PCI
-	select RTW88_CORE
-	select RTW88_PCI
-	help
-	  Select this option will enable support for 8822BE chipset
-
-	  802.11ac PCIe wireless network adapter
-
-config RTW88_8822CE
-	bool "Realtek 8822CE PCI wireless network adapter"
-	depends on PCI
-	select RTW88_CORE
-	select RTW88_PCI
-	help
-	  Select this option will enable support for 8822CE chipset
-
-	  802.11ac PCIe wireless network adapter
-
-config RTW88_DEBUG
-	bool "Realtek rtw88 debug support"
-	depends on RTW88_CORE
-	help
-	  Enable debug support
-
-	  If unsure, say Y to simplify debug problems
-
-config RTW88_DEBUGFS
-	bool "Realtek rtw88 debugfs support"
-	depends on RTW88_CORE
-	help
-	  Enable debug support
-
-	  If unsure, say Y to simplify debug problems
-
-endif

files/wifi-drivers/usr/src/linux-headers-5.10.0-12-amd64/drivers/net/wireless/realtek/rtw88/Makefile

@@ -1,23 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
-
-obj-$(CONFIG_RTW88_CORE)	+= rtw88.o
-rtw88-y += main.o \
-	   mac80211.o \
-	   util.o \
-	   debug.o \
-	   tx.o \
-	   rx.o \
-	   mac.o \
-	   phy.o \
-	   coex.o \
-	   efuse.o \
-	   fw.o \
-	   ps.o \
-	   sec.o \
-	   regd.o
-
-rtw88-$(CONFIG_RTW88_8822BE)	+= rtw8822b.o rtw8822b_table.o
-rtw88-$(CONFIG_RTW88_8822CE)	+= rtw8822c.o rtw8822c_table.o
-
-obj-$(CONFIG_RTW88_PCI)		+= rtwpci.o
-rtwpci-objs			:= pci.o

finalize.sh

@@ -1,19 +0,0 @@
-# unprivileged user's name, change this if it isnt right
-LOCAL_USER="michael"
-
-# change default shells for root and unpriv-user to zsh
-usermod --shell /bin/zsh root
-usermod --shell /bin/zsh $LOCAL_USER
-#usermod -aG sudo $USER
-
-# List gnome extensions to install
-echo -e "\nGnome extensions:"
-echo -e "\tAppIndicator and KStatusNotifierItem Support: https://extensions.gnome.org/extension/615/appindicator-support/"
-echo -e "\tArcMenu: https://extensions.gnome.org/extension/3628/arcmenu/"
-echo -e "\tLaunch new instance: https://extensions.gnome.org/extension/600/launch-new-instance/"
-echo -e "\tRemovable Drive Menu: https://extensions.gnome.org/extension/7/removable-drive-menu/"
-echo -e "\tTactile: https://extensions.gnome.org/extension/4548/tactile/"
-echo -e "\tVitals: https://extensions.gnome.org/extension/1460/vitals/"
-echo -e "\tWorkspace Indicator: https://extensions.gnome.org/extension/21/workspace-indicator/"
-echo -e "\tAutohide Battery: https://extensions.gnome.org/extension/595/autohide-battery/"
-echo -e "\tSound Input & Output Device Chooser: https://extensions.gnome.org/extension/906/sound-output-device-chooser/"

gnome_install.sh

@@ -1,11 +0,0 @@
-# Copy over unstable repo stuff
-cp ./files/unstable.list /etc/apt/sources.list.d/unstable.list
-cp ./files/preferences /etc/apt/preferences
-
-# Install gnome
-pacman -Syu gnome-session gnome-shell gnome-backgrounds gnome-applets gnome-control-center mutter gjs gnome-tweaks power-profiles-daemon
-
-# Make all the monitors swap workspaces together (WHY THE FUCK ISNT THIS DEFAULT GNOME? BRUH.)
-gsettings set org.gnome.mutter workspaces-only-on-primary false
-
-echo "gnome installed"

laptop_install.sh

@@ -1,21 +0,0 @@
-LOC=$1
-
-if [ -z "$1" ]
-  then
-    LOC="./.auto-install"
-fi
-
-git clone https://gitea.voxelvortex.tk:443/voxelvortex/InstaTout.git $LOC
-git fetch
-git branch arch
-
-# Install all the generic programs
-$LOC/program_install.sh
-
-# Make sure all the packages I want for my laptop are installed
-pacman -Syu chromium python3 python-pip docker-compose docker zsh gdb p7zip git iputils dnsutils net-tools handbrake handbrake-cli ffmpeg htop nano vim neovim nmap netcat ssh tree vlc obs-studio audacity filezilla
-
-# Point to Fprint driver
-echo -e "\n\nFigerprint\n\tCheck out: https://gist.github.com/d-k-bo/15e53eab53e2845e97746f5f8661b224"
-
-sh $LOC/finalize.sh

program_install.sh

@@ -1,23 +0,0 @@
-# Install basic dependencies
-pacman -Syu curl wget gpg
-
-# Librewolf repo
-echo "deb [arch=amd64] http://deb.librewolf.net $(lsb_release -sc) main" | tee /etc/apt/sources.list.d/librewolf.list
-#echo "deb [arch=amd64] http://deb.librewolf.net bullseye main" | tee /etc/apt/sources.list.d/librewolf.list
-wget https://deb.librewolf.net/keyring.gpg -O /etc/apt/trusted.gpg.d/librewolf.gpg
-
-
-# Install my default apt stuff
-pacman -Syu chromium firefox python3 python-pip python-wheel docker-compose docker zsh p7zip git iputils dnsutils net-tools htop nano vim neovim netcat ssh tree vlc neofetch zip unzip cryptsetup virt-manager qemu
-
-# Update python pip
-python3 -m pip install -U pip
-
-# Snap installs
-snap install core discord code
-
-# Install Ghidra
-git clone https://github.com/NationalSecurityAgency/ghidra.git /home/michael/Applications/ghidra
-ln -s /home/michael/Applications/ghidra/ghidraRun /usr/bin/ghidra
-
-